We need to dampen the system to reduce motor vibrations transmitted to the camera. To do this, we'll use silicone damping balls at the bulkhead/gimbal interface.
Every damping ball is different (elasticity, geometry,..) so we'll order three different options and test them individually.
To perform the test, we'll connect the gimbal to a oscillation generator and sweep at different frequencies (similar to those transmitted by propulsion system). An accelerometer will be placed near the camera to track acceleration data. We'll first conduct a baseline test with no dampeners, then test each of the three options individually.
Once the testing is complete, we'll use the accelerometer data to determine which dampener will perform the best, and move forward with it for the rest of the design.