For laminar, $\eta=5\left( \frac{y}{\delta} \right)$ For turbulent, $\eta=\left( \frac{y}{\delta} \right)^{1/7}$ # Blasius solution The **Blasius solution** gives the velocity profile in a **laminar boundary layer over a smooth, flat plate** when the outside speed $U$ is constant (zero streamwise pressure gradient). Fluid sticks to the plate, so $u=0$ at the wall; farther away, $u$ approaches $U$. The layer thickens downstream because viscosity spreads the wall's slowing effect into more of the flow. ## Reading a Blasius table One common table convention is $ \eta=y\sqrt{\frac{U}{\nu x}},\qquad \frac{u}{U}=f'(\eta). $ - $x$: distance downstream from the plate's leading edge; $y$: distance normal to the plate. - $\nu$: kinematic viscosity; $\eta$: dimensionless distance from the wall. - A Blasius table's **$f'$ column is the velocity ratio $u/U$**. You do not need its $f$ or $f''$ columns to read a velocity profile. For example, in a table using this convention, $f'(2)=0.6298$ means $u=0.6298U$ at $\eta=2$. The same $f'(\eta)$ curve works at different downstream positions because $\eta$ rescales $y$ as the layer grows. The 99% boundary-layer thickness and Reynolds number are approximately $ \delta\approx5\sqrt{\frac{\nu x}{U}}=\frac{5x}{\sqrt{Re_x}}, \qquad Re_x=\frac{Ux}{\nu}. $ Thus, for an assignment that supplies $y/\delta$, use $\eta\approx5y/\delta$ and then read $f'(\eta)$ from the table. At $y/\delta=0.4$, for example, $\eta=2$ and $u/U=0.6298$. At $\eta=5$, $u/U\approx0.99$, which is why $\delta$ is called the *99% thickness*. ## Other useful results For this same laminar flat-plate flow, $ \frac{\delta_D}{x}\approx\frac{1.72}{\sqrt{Re_x}},\qquad \frac{\delta_M}{x}\approx\frac{0.664}{\sqrt{Re_x}},\qquad c_{f,x}=\frac{0.664}{\sqrt{Re_x}}. $ Here $\delta_D$ is displacement thickness and $\delta_M$ is momentum thickness; see [[ME 308 - Boundary Layer Thickness Measures]]. $c_{f,x}$ is the **local** skin-friction coefficient. These results apply to the laminar, zero-pressure-gradient region; see [[ME 308 - Turbulent Boundary Layers]] for a turbulent profile. > [!info] Two definitions of $\eta$ > Section 9.4 of the course textbook defines $\eta_{\text{book}}=y\sqrt{U/(2\nu x)}$. Other tables, including the one in [[ME 30800/ME 308 HW 09]], use $\eta_{\text{table}}=y\sqrt{U/(\nu x)}=\sqrt{2}\,\eta_{\text{book}}$. Use the definition printed with the table or graph you are reading. The physical velocity profile is the same. Source: [[Notes on Thermodynamics, Fluid Mechanics, and Gas Dynamics]], Section 9.4, pp. 931–934.