- In laminar flow, momentum moves between layers via shear stress, keeping layers parallel
- In turbulent flow, momentum moves between layers via eddies. These eddies cause high-velocity fluid away from the wall to move down towards it. This increases $\frac{\partial u_x}{\partial y}$ near the wall, increasing skin friction
- When $\frac{\partial p}{\partial x}>0$ is applied, it pushes fluid back: $P_1 \rightarrow \square \twoheadleftarrow P_2$, causing the velocity profile to move backwards until $\frac{\partial u_x}{\partial y}\Biggr|_{y=0}=\tau_w=0 \rightarrow$ separation point. Turbulent flow can go further past this point than laminar flow]because more momentum is concentrated at the wall, can resist pressure force more than laminar can
- If we look at fluid moving past a stationary cylinder, laminar has earlier separation point, causing BL to separate from surface
- Laminar flow's lower $x_{\mathrm{sep}}$ leads to larger area behind surface, increasing the drag force.
- In many cases, a turbulent boundary layer can resist adverse pressure gradients better than a laminar boundary layer, delaying separation & stall. Vortex generators promote momentum mixing to help keep flow attached
- For example, when an airfoil is moving thru the air at a high angle of attack, vortex generators help resist an adverse pressure gradient & delay separation