1. 99% boundary layer thickness $\delta$ - "what's the distance to wall s.t velocity profile is 99% outer flow velocity" - Can't apply [[ME 308 - Bernoulli’s Equation|Bernoulli's]] from outer -> inner layer (b/c inviscid assumption 2. Displacement thickness $\delta_{D}=\int_{0}^\delta\left( 1- \frac{u}{U} \right)dy$ - Mass flow rate deficit 3. Momentum thickness $\delta_{M}=\int_{0}^\delta \frac{u}{U}\left( 1-\frac{u}{U} \right)dy$ - Thickness of hypothetical layer moving at the free stream velocity $U$ whose momentum flux equals the momentum flux deficit caused by the boundary layer > [!info] Consider mass flow rate between 2 parallel plates w/ boundary layer. Find $\dot{m}$ thru channel in terms of $\delta$ (p.29) > $ > \dot{m}_{1/2} = \int_0^\delta \rho u\,dy + \int_\delta^{H/2}\rho U'\,dy > $ > $ > = \int_0^\delta \rho u\,dy + \int_0^{H/2}\rho U'\,dy-\int_0^\delta \rho U'\,dy > $ > $ > = \int_0^\delta \rho(u-U')\,dy+\rho U'\frac{H}{2} > $ > $ > = \rho U'\left[\int_0^\delta\left(\frac{u}{U'}-1\right)dy+\frac{H}{2}\right] > $ > $ > = \rho U'\left[\frac{H}{2}-\underbrace{\int_0^\delta\left(1-\frac{u}{U'}\right)dy}_{\delta_D}\right] > $ > $ > \dot{M} = 2\rho U'\left(\frac{H}{2}-\delta_D\right) > $ > [!info] Consider boundary layer flow over a flat plate. Determine drag acting on plate in terms of momentum thickness (p. 29) > $ > \text{LME: }-F_D = -\rho U^2h+\int_0^\delta \rho u^2\,dy > $ > > $ > \text{CoM: }\rho Uh = \int_0^\delta \rho u\,dy > $ > > $ > h = \int_0^\delta \frac{u}{U}\,dy > $ > > $ > -F_D = \rho U^2\left[\int_0^\delta\left(\frac{u}{U}\right)^2-\frac{u}{U}\,dy\right] > $ > > $ > = -\rho U^2\int_0^\delta\frac{u}{U}\left(1-\frac{u}{U}\right)dy > $ > > $ > F_D = \rho U^2\delta_m > $ > > $ > \delta_h>\delta_D>\delta_m > $