# Work and strain energy
- For gradually applied loads on a linearly elastic body, external work equals stored strain energy: $W_{ext}=U$.
- Work is the area under the load–displacement curve. For linear loading, $W=\tfrac12 P\Delta$, with corresponding expressions for moments and torques.
- Add the energy from all members, segments, and relevant deformation modes:
$
U=\sum_{\text{segments}}\int\left(\frac{N^2}{2EA}+\frac{T^2}{2GI_p}+\frac{M^2}{2EI}+\frac{f_sV^2}{2GA}\right)dx
$
- $N,T,M,V$ are internal axial force, torque, bending moment, and shear force. Use separate expressions where loading or section properties change.
- The shear form factor $f_s$ accounts for nonuniform shear stress: rectangle $6/5$, solid circle $10/9$, thin tube $2$. Shear energy is usually small compared with bending energy in slender beams.
- $W_{ext}=U$ supplies only one equation, so it generally cannot isolate several unknown displacements under multiple loads.
# Castigliano’s second theorem
For a linearly elastic structure, differentiating total strain energy with respect to an independent applied load gives the displacement at that load, in its direction:
$
\Delta_i=\frac{\partial U}{\partial P_i},\qquad
\theta_i=\frac{\partial U}{\partial M_i},\qquad
\phi_i=\frac{\partial U}{\partial T_i}
$
- A force gives translation, a bending moment gives slope, and a torque gives twist. A negative result means motion opposite the assumed load direction.
- Express internal resultants in terms of the applied loads before differentiating. Keep the load of interest symbolic and hold other independent loads constant.
- For ideal trusses, members store axial energy only: $U=\sum_j N_j^2L_j/(2E_jA_j)$.
# Dummy loads
If no corresponding load exists at the desired location and direction, introduce a symbolic dummy force, moment, or torque.
1. Include it when finding reactions, internal resultants, and $U$.
2. Differentiate with respect to the dummy load.
3. **Set the dummy load to zero after differentiation.**
# Indeterminate structures and compatibility
- Equilibrium alone cannot determine all reactions. Choose independent redundant reactions $R_i$ so that releasing their restraints leaves a stable, determinate structure.
- Use equilibrium to express the other reactions in terms of the applied loads and redundants, then write $U$ in those variables.
- Each redundant supplies a compatibility equation. For a stationary support, the displacement or rotation in its restrained direction is zero:
$
\frac{\partial U}{\partial R_i}=0
$
- Solve these equations together with equilibrium to obtain reactions. Then use Castigliano’s theorem for any requested displacement, retaining dummy loads until after differentiation.
%% Sources: ME323_Fall 2026_Bansal_Lecture 22.pptx; ME323_Fall 2026_Bansal_Lecture 23.pptx; ME323_Fall 2026_Bansal_Lecture 24.pptx. %%