- Cylindrical pressure vessels develop axial & hoop stress - Axial stress $\sigma_{a}$ acts along the cylindrical axis - Hoop stress $\sigma_{h}$ acts along the circumference - Spherical pressure vessels develop the same stress in every tangent direction - The thin-walled analysis uses the internal pressure $p,$ inner radius $r,$ and wall thickness $t$ # Cylindrical Pressure Vessels ## Axial Stress ![[Pasted image 20261109190437.png|right|300]] $ \sum F_{x}=0:\sigma_{a}A_{a}-pA_{pa}=0 $ $ A_{pa}=\pi r^2,\quad A_{a}=\pi[(r+t)^2-r^2]\approx 2\pi rt $ $ \sigma_{h}=\frac{pA_{pa}}{A_{a}}=\frac{pr}{t} $ ## Hoop Stress ![[Pasted image 20261109190428.png|center|500]] - Use a longitudinal cut through a segment of length $\Delta x$ - The two walled sections resist the pressure resultant - $A_{h}=2t\Delta x$ is the total metal area resisting the hoop stress. The longitudinal cut exposes two wall sections, each with area $t\Delta x$ - $A_{ph}=2r\Delta x$ is the projected pressure area. It equals the internal diameter, $2r,$ multiplied by the segment length $\Delta x$ For a thin-walled cylindrical pressure vessel, axial stress is one-half of hoop stress $ \sigma_{a}=\frac{1}{2}\sigma_{h} $ # Spherical Pressure Vessels ![[Pasted image 20261109190742.png|right|200]] $ \sum F_{x}=0:\sigma_{s}A_{s}-pA_{ps}=0 $ $ A_{ps}=\pi r^2,\quad A_{s}=\pi[(r+t)^2-r^2]\approx 2\pi rt $ $ \sigma_{s}=\sigma_{a}=\frac{pr}{2t} $